VIEW/DOWNLOAD BROCHURE           VIEW COMPLETE CATALOG ON BIDSPOTTER

​

REAL ESTATE:  SOLD 

​

PLATE CUTTING SYSTEMS:  2009 KOIKE ARONSON GM2-2500 MASTERGRAPH II PLASMA CUTTING SYSTEM, KAR-CNCX WINDOWS-BASED CNC CONTROL, DUAL SIDE DRIVE GANTRY, SINGLE PLASMA TORCH, (3) OXY-FUEL TORCHES, THERMAL DYNAMICS ULTRA-CUT 200 PLASMA POWER SUPPLY, S/N 05334691, (POWER SUPPLY REBUILT IN 2017-UPGRADED TO HIGH DEF. ABILITIES), DUAL 8' X 11' WATER TABLES, 150” WIDTH BETWEEN RAILS, 32’-9” OVERALL RAIL LENGTH * CG SYSTEMS M# TAURUS 3000 PLASMA CUTTING SYSTEM, BURNY 10LCD PLUS CONTROL, DUAL SIDE GANTRY, SINGLE PLASMA, SINGLE HEAD OXY-FUEL, HYPERTHERM POWER SUPPLY, M# HT2000, 12' CUT WIDTH, APPROX. 75' RAIL, (UNIT IS DISASSEMBLED, NO CUTTING TABLE INCLUDED) * LINDE SHAPEMAKER MAGNETIC PATTERN TORCH

 

PRESS BRAKES:  2014 TOSKAR EASYFAB 3700-220 CNC PRESS BRAKE, 220-TON X 12' CAP., TOSKAR 2-AXIS CNC BACK GAUGE W/STEP AUTOMATION CNC CONTROL, 10'-6" BHSG, 2-SPEED APPROACH, AUTO CROWNING, AMADA-TYPE TOOL CLAMPS, SAFETY LIGHT CURTAINS, FLOOR MT. * DELAURICE HYD. PRESS BRAKE, 225-TON X 13’ CAP., 12'-4" BHSG, 6" BASE EXTENSION, SINGLE MICRO DEPTH STOP, FLOOR MT. * HTC HYD. PRESS BRAKE, 150-TON X12’ CAP., 10'-6" BHSG, FRONT OP. BACK GAUGE, 6-POSITION DEPTH STOP, FLOOR MT. * CINCINNATI 130X8 PRESS BRAKE, 130-TON X 10’ CAP., 8'-6" BETWEEN HOUSINGS, 4" STROKE, MECHANICAL CLUTCH, FLOOR MT. (LOCATED IN STORAGE OFF SITE) * LG. QTY. PRESS BRAKE DIES INCLUDING ACUTES, 4-WAY, FLATTENING, GOOSENECKS, W/STORAGE RACKS

 

SHEARS:  HTC M# 500-12C HYD. PLATE SHEAR, 1/2" X 12' CAP., 18' SQ. ARM, NO BACK GAUGE, FLOOR MT. * AMERICAN HERCULES HYD. PLATE SHEAR, 3/8"" X 12' CAP., 12' SQUARING ARM, 36" FOBG * SUMMIT M# 12X1/4 HYD. PLATE SHEAR, 1/4" X 12' CAP., FOBG (LOCATED IN STORAGE OFF-SITE)

 

PLATE ROLLS & TUBE BENDERS:  J.M. MONTGOMERY M# 12025 PLATE ROLL, INITIAL PINCH, 1/4" X 10' CAP., AIR-DROP END, 10 HP, W/CUSTOM BUILT CRANE-HELD OVERHEAD ROLLER SUPPORT * HUTH M# 2806, HORIZ. HYD. TUBE BENDER, 3” CAP, 1-1/4” ROUND DIES * MANUAL TUBE BENDER

 

IRONWORKERS:  2004 GEKA M# HYD-55, 50-TON CAP., HYDRAULIC, 20" INDEX RAIL, MATERIAL END STOP, FOOT SWITCHES * EDWARDS, M# JAWS IV, 100-TON CAP., HYDRAULIC, MATERIAL END STOP, FOOT SWITCHES * WHITNEY 70-TON C-FRAME PUNCH, 8” THROAT, W/HYD. POWER SUPPLY * WHITNEY M# 200 6” CORNER NOTCHER

 

SAWS:  HEM HORIZ. BANDSAW, M# SIDEWINDER AUTO A/F, 12” X 16”, POWER CLAMP & FEED * HOTON M# CS-350 COLD SAW, 14", MITER, COOLANT

 

DRILL PRESSES:  CASER, M# F.32 RADIAL ARM DRILL PRESS, 4' ARM, 11" COLUMN, POWER CLAMP * GENERAL INT'L. 22” FLOOR DRILL PRESS

 

ROLLING STOCK:  2004 INTERNATIONAL 4300 DT466 FLATBED TRUCK, 228,818 MILES, DAY CAB, STD TRANS., SINGLE AXLE, ALUMINUM WHEELS, 22' STEEL FLATBED W/HEADACHE RACK * 1939 PLYMOUTH 2-DR HARDTOP BODY W/FRAME

 

TRAILERS:  20’ TANDEM AXLE FLATBED TRAILER, BUMPER HITCH, WOOD DECK, PULL-OUT RAMPS * 

 

WELDING TRUCKS:  2003 DODGE RAM 3500 WELDING TRUCK, 370,215 MILES, 4-DOOR CREW, 4X4, DIESEL, STD. TRANS., CUSTOM WHEELS & GRILL GUARD/BUMPER, 10' CUSTOM WELD BED, TOOL BOXES, HOSE & LEAD REELS (NO WELDER INCLUDED) * 1996 FORD F-350XLT WELDING TRUCK, 207,515 MILES, SINGLE CAB, DIESEL, STD. TRANS., 9' CUSTOM STEEL WELDING BED W/INTEGRATED TOOLBOXES, HOSE & LEAD REELS, 4" BENCH VISE, LINCOLN SA-200 PORTABLE WELDER

 

WELDERS & PLASMAS:  MILLER PORTABLE WELDER, M# BIG BLUE 300 * LINCOLN POWERMIG 255 * (2) LINCOLN CV-300 MIGS W/FEEDERS * THERMAL DYNAMICS CUTMASTER 52 PLASMA * HOBART HANDLER 140 PORT. MIG * LINCOLN 140C POWER MIG * MILLER DIVERSION 180 PORT. TIG * LINCOLN LN-7 FEEDER * MILLER MIG DELTAWELD 651 * MILLER MIG, M# SCP-200C * MILLER M# CP-300 * MILLER POWERMIG 255C * THERMAL ARC M# PAK 5XR PORT. PLASMA * (2) CUTTING TORCH CARTS

 

AIR COMPRESSORS:  INGERSOLL RAND M# 30T -2475N7.5V, 5HP, 80 GALLON VERTICAL * G-D 5HP UPRIGHT W/80 GAL TANK * INGERSOLL RAND M# SSR-125H ROTARY SCREW AIR COMPRESSOR, 28,629 HOURS, 125 CFM, 35 HP, 128 PSIG, 120 GALLON HORIZ. TANK * (2) COMPRESSORS FOR PARTS USE

 

FORKLIFTS & LIFTS:  YALE 2,000 LB. GLP020CBJUAD073, 5,806 HRS, 2-SECTION MAST, 42” FORKS, PNEUMATIC TIRES, LPG * GENIE GS-19 ELECTRIC SCISSOR LIFT 

 

MISC. SHOP EQUIPMENT:  8’ x 40’ STORAGE CONTAINER * ROTABEST MAG DRILL RADIAL ARM SAW * KOIKE IK-12 BEETLE TRACK TORCH * GRIZZLY 3” BELT SANDER, M# G0489 * ROTARY PARTS TUMBLER * PROFORMER 36” MANUAL BOX/PAN BRAKE * 

 

MISCELLANEOUS SUPPORT:  CUSTOM BUILT 2-DR. WELD CABINET W/TORCH HOSE REEL * CHOP SAWS * MITER SAW * PIPE STANDS * BANDING CARTS * GRINDERS * SAWZALLS * C-CLAMPS * VISE GRIP CLAMPS * SHOP FANS * BENCH GRINDERS * STEEL CABINETS * (5) VERTICAL PLATE RACKS * BOTTLE RACKS * SAW HORSES * BAR RACKS * CRAFTSMAN 14-DR. TOOL CABINET * PEDESTAL VICE * DUMP HOPPERS * HAND TOOLS * ETC. 

 

INVENTORY:  LARGE STEEL INVENTORY INCLUDING: MIXED STRUCTURALS – SQUARE, RECTANGULAR & ROUND TUBING, FLAT BARS, ANGLE IRON, CHANNELS, RD BARS * STEEL SHEET & PLATE DROP-OFFS * STRUCTURAL & PLATE RACKS

 

FASTENER INVENTORY:  A & B SUPPLY COMPLETE FASTENER/INDUSTRIAL PRODUCTS INVENTORY TO BE SOLD AS SINGLE LOT!!!!!  ESTIMATED 10,000 LBS. OF BRAND NEW FASTENERS, STAGED IN ENVIRONMENTALLY CONTROLLED SPACE, INCLUDING:  GRADE 8 BOLTS & NUTS ¼-20 X ½” BOLTS UP TO 1” X 10” TO * GRADE 5 BOLTS & NUTS ¼-20 X ½” TO 1-8 X 5-1/2” * STUDS THRU ¾” X 8” * CARRIAGE BOLTS * SELF-TAPPING SCREWS * SHEET METAL SCREWS * ALLEN HEAD CAP SCREWS THRU 5/8” X 14” * ALL-THREAD * U-BOLTS * HOSE CLAMPS * 45 ADJUSTABLE METAL SHELVES W/PLASTIC BIN BOXES

 

OFFICE:  FORMICA TOP DESKS * SURVEILLANCE SYSTEM * COMPUTERS * PRINTERS * SHARP CONSOLE COPIER, M# MX-2600N * FILE CABINETS * CHAIRS * METAL CABINETS * PICNIC TABLES * ETC. 

​

Terms

15% buyer’s premium (ONSITE AUCTION) - 18% buyers premium (ONLINE OR PROXY BIDS).

FULL PAYMENT MUST BE MADE DAY OF AUCTION.

 

We accept cash, cashier’s check, check with bank letter of guarantee, or wire transfer.

NO credit cards will be accepted!

Sales tax will be charged without tax exemption in hand on sale day!

 

REMOVAL IS AT BUYER’S RISK & EXPENSE. ITEMS MUST BE REMOVED BY FRIDAY JULY  3RD @ 4:00PM!!

​

ATTENTION RIGGERS & BUYERS!!  

 All Riggers Removing Equipment from the property must have a minimum of $1M insurance certificate.  All certificates must be made available to the auction company before any removal can take place.  It is the responsibility of the Rigger/Buyer to properly disconnect equipment and/or clean up any spills that may have occurred during removal.

​

Registration

TO REGISTER FOR THIS AUCTION, ESTABLISH CREDIT & BID ONLINE

​

To be a qualified ONLINE BIDDER you must be registered on Bidspotter.com, prior to bidding.

Qualified bidders are required to have a deposit and/or approval by Duckwall & Co. Inc.

​

BIDS SUBJECT TO 18% BUYERS PREMIUM