VIEW/DOWNLOAD BROCHURE 

​

CNC TURNING CENTERS: 

2013 HAAS ST-40 BIG BORE CNC TURNING CENTER, S/N 3096271, REMOTE JOG, 44” CENTERS, 18” 3-JAW CHUCK, 12-POSITION VDI/BOT LIVE TURRET, PERFORMANCE PKG., TOOL PRESETTER, TAIL STOCK, CHIP CONVEYOR, APPROX. 50” CENTERS 

1995 DAEWOO PUMA-18 CNC TURNING CENTER, S/N PM180023, FANUC SERIES 16-T CONTROL, 60” CENTERS, 24” 3-JAW CHUCK, 12-POSITION TURRET, TAIL STOCK, CHIP CONVEYOR * 2013 HAAS ST-30 BIG BORE CNC TURNING CENTER, S/N 3095446, 26” CENTERS, 15” 3-JAW CHUCK, 12-POSITION TURRET, TOOL PRESETTER, TAIL STOCK, CHIP CONVEYOR *

2013 HAAS ST-30 CNC TURNING CENTER, S/N 3095526, 12” 3-JAW CHUCK, 12-POSITION TURRET, TOOL PRESETTER, TAIL STOCK, CHIP CONVEYOR

12/2010 HAAS ST-30 CNC TURNING CENTER, S/N 3087525, 26” CENTERS, 12” 3-JAW CHUCK, 12-POSITION TURRET, TOOL PRESETTER, TAIL STOCK, CHIP CONVEYOR

2011 HAAS ST-30 CNC TURNING CENTER, S/N 3087704, 26” CENTERS, 12” 3-JAW CHUCK, 12-POSITION TURRET, TOOL PRESETTER, TAIL STOCK, CHIP CONVEYOR

2001 HAAS SL-20T CNC TURNING CENTER, S/N 63718, 8” 3-JAW CHUCK, 10-POSITION TURRET, TOOL PRESETTER, TAIL STOCK, CHIP AUGER * 2006 HAAS SL-10T CNC TURNING CENTER, S/N 3075386, 6” 3-JAW CHUCK, 12-POSITION TURRET, TOOL PRESETTER, PARTS PICKER, TAIL STOCK, CHIP AUGER W/HAAS SERVO BAR 300 INTEGRATED BAR FEEDER

2009 MAZAK QTN 450-11 CNC TURNING CENTER, S/N 213691,  MAZATROL MATRIX NEXUS CNC CONTROL, 120” CENTERS, 18” 3-JAW CHUCK, 24-POSITION TURRET, SMW-AUTO BLOCK DUAL HEAD HYD. STEADY REST, TOOL PRESETTER, TAIL STOCK, CHIP CONVEYOR 

2009 MAZAK QTN 450-II CNC TURNING CENTER, S/N 215236, MAZATROL MATRIX NEXUS CONTROL, 80” CENTERS, 18” 3-JAW CHUCK, SMW-AUTO BLOCK HYD. STEADY REST, 24-POSITION TURRET, TOOL PRESETTER, CHIP CONVEYOR 

2014 DOOSAN INFRACORE PUMA 400LC CNC TURNING CENTER, S/N ML0134-004614, DOOSAN-FANUC  Oi CONTROL, 80” CENTERS, 21” 3-JAW CHUCK, 12-POSITION TURRET, SCHUNK PROGRAMMABLE HYD. STEADY REST, TOOL PRESETTER, TAIL STOCK, CHIP CONVEYOR 

2014 DOOSAN INFRACORE PUMA 400LC CNC TURNING CENTER, S/N ML0134-004621, DOOSAN FANUC Oi CONTROL, 80” CENTERS, 21” 3-JAW CHUCK, 12-POSITION TURRET, SCHUNK PROGRAMMABLE HYD. STEADY REST, TOOL PRESETTER, TAIL STOCK, CHIP CONVEYOR

2015 DOOSAN INFRACORE PUMA 300LC, S/N ML0065-003963, DOOSAN FANUC Oi CONTROL, 50” CENTERS, 15” 3-JAW CHUCK, 12-POSITION TURRET, SCHUNK PROGRAMMABLE HYD. STEADY REST, TOOL PRESETTER, TAIL STOCK, CHIP CONVEYOR *

 

CNC VERTICAL MACHINING CENTERS: 

2015 HAAS VF-7/50 VMC, S/N 1121140, 28” X 84” TABLE, 24-TOOL ATC, HAAS HRT-450 16” 4TH AXIS ROTARY TABLE, TAIL STOCK, REMOTE JOG, CHIP AUGER 

2013 HAAS VF-4 VMC, S/N 1103311,  18” X 52” TABLE, 20-TOOL ATC, TSUDAKOMA 12” 4TH AXIS ROTARY TABLE W/TAIL STOCK, THRU-SPINDLE COOLANT, CHIP AUGER 

2006 DOOSAN DAEWOO DMV-4020 VMC, S/N AV5E2725, FANUC SERIES 21i-MB CONTROL, REMOTE JOG, 20” X 47” TABLE, 24-TOOL ATC, TSUDAKOMA RT300B 12” 4TH AXIS ROTARY TABLE, CHIP CONVEYOR 

MORI SEIKI MV-55/50 VMC, S/N 1128, FANUC 10M CONTROL, 24” X 68” TABLE, 30-TOOL ATC, TSUDAKOMA 12” 4TH AXIS ROTARY TABLE W/TAIL STOCK 

CINCINNATI ARROW1250C VMC, S/N 7064-A00-KT0129, (SALVAGE MACHINE) SIEMENS ACRAMATIC 2100 CONTROL, 24” X 54” TABLE, 4TH AXIS ROTARY TABLE 

SHARP CNC VERT. MILL, M# TRAK A.G.E.3, 10” X 51” TABLE, POWER FEED, V.S. HEAD

​

TOOLING:

APPROX. (150) CAT 50 TAPER TOOL HOLDERS * CAT 40 TAPER TOOL HOLDERS * TOOL BLOCKS * ‘THE KEEPER’ AUTOMATED INVENTORY SOLUTIONS VENDING MACHINE * LG. QTY. INSERT TOOL HOLDERS * INDEXABLE INSERTS * INSERT DRILLS * SPADE INSERT DRILLS * SPADE BLADES * LG. QTY. BORING BARS * TAPS * * SLEEVES * HARD & SOFT JAWS * CENTERS * COLLETS * TAPER & STRAIGHT SHANK DRILL BITS * END MILLS * REAMERS * SPANNER WRENCHES * FRACTION, NUMBER & LETTER DRILL BITS * TOOLING CABINETS * KURT SINGLE & DOUBLE ACTING MILL VISES * 8” RIGHT ANGLE ROTARY TABLES * TAIL STOCKS * STEADY RESTS * V-BLOCKS * 3 & 4-JAW CHUCKS * RIGHT ANGLE BLOCKS * HOLD DOWN CLAMPS * ETC.

 

INSPECTION:

MITUTOYO PH-A14 14” OPTICAL COMPARATOR, S/N 012451311, MITUTOYO 2-AXIS DRO, 10X, 20X & 50X LENSES 

TESA 24” DIGITAL HEIGHT GAUGE, M# 007.30041 

MITUTOYO HEIGHT MASTER 12” HEIGHT GAUGE 

STARRETT ANALOG HARDNESS TESTER, M# 3814 * PRECISION GRANITE 48” X 72” X 8” BLACK GRANITE SURFACE PLATE W/STAND * PRECISION GRANITE 36” X 48” X 6” BLACK STEP PLATE W/STAND *

MICROFLAT 36” X 48” X 6” BLACK GRANITE STEP PLATE W/STAND *

PYRAMID 24” X 36” X 5” BLACK GRANITE SURFACE PLATE W/T-SLOT & STAND * 24” X 36” X 5” BLACK GRANITE STEP PLATE W/STAND *

MITUTOYO OD MICROMETERS, 1” – 18” * DIAL, DIGITAL & VERNIER CALIPERS *

GAGEMAKER RG-7001 4” – 8” EXTERNAL THREAD ROLL GAUGE *

MITUTOYO  DIAL BORE GAUGES * MITUTOYO SJ-201P SURFACE ROUGHNESS TESTER * PIN & PLUG GAUGE SETS * PISTOL GRIP BORE MICS * SINE PLATE * MULTISTIM BALL GAUGE SET * OILFIELD API OD/ID THREAD GAUGES 

 

FORKLIFTS: 

2008 HYSTER 5,000 LB. CAP., M# S50FT, S/N 5187V11758F, 3-SECTION MAST, SIDE SHIFT, 42” FORKS, HARD SURFACE TIRES, LPG, 12,297 HOURS * 2008 HYUNDAI 6,000 LB. CAP., M# HLF30C-5, S/N FK0310054, 3-SECTION MAST, SIDE SHIFT, 48” FORKS, HARD SURFACE TIRES, LPG, 3,267 HOURS * 2007 KOMATSU 5,000 LB. CAP., M# FG25T-16, S/N 218565A, 3-SECTION MAST, SIDE SHIFT, 46” FORKS, A/T SOLID TIRES, LPS, 2,262 HOURS * 2003 KOMATSU 3,000 LB. CAP., M# FG18HT-20, S/N 675905A, 3-SECTION MAST, SIDE SHIFT, 48” FORKS, A/T SOLID TIRES, LPG, 4,506 HOURS * 2012 TOYOTA 3,000 LB. CAP., M# 8FGCU15, S/N 18731, 2-SECTION MAST, SIDE SHIFT, 42” FORKS, HARD SURFACE TIRES, LPG, 2,360 HOURS * FORKLIFT PLATFORM BASKET * FORKLIFT BOTTLE CARRIER RACK * SNOWSPORT HD UTILITY PLOW W/RECEIVER MOUNT  

 

CRANES:

BRIDGE CRANE SPECIALISTS 2 TON BRIDGE CRANE SYSTEM, 21’ SPAN SINGLE GIRDER TOP RIDING BRIDGE W/R&M LOADMATE 2 TON ELEC. CHAIN HOIST, PENDANT CONTROL, 4-COLUMN APPROX. 30’ RUN COLUMN-SUPPORTED RUNWAY, 8’ HEIGHT *

BRIDGE CRANE SPECIALISTS 1 TON BRIDGE CRANE SYSTEM, APPROX. 20’ SPAN SINGLE GIRDER TOP RIDING BRIDGE W/UNDER SLUNG R&M LOADMASTER HOIST, PENDANT CONTROL, 4-COLUMN, APPROX. 30’ RUN COLUMN-SUPPORTED CRANEWAY, APPROX. 10’6” HEIGHT *

(3) ABELL - HOWE 360 DEG. FLOOR MTD. JIB CRANES * (4) COLUMN MOUNT JIB CRANES 

 

COMPLETE ZINC PHOSPHATE COATING SYSTEM: 5-VAT DIP-TYPE SYSTEM W/3’ X 6’ X 4’ DEEP VATS, (2) 30” X 60” X 16” DIP BASKETS * 51” X 8’ FINAL DRIP TANK * PROCESS TECHNOLOGIES HEATER TIMERS, ACCESS.

 

SAWS: HE&M H90A-4 HORIZ. BANDSAW, S/N 1017607, 2007, APPROX. 12-3/4” X 12-3/4” CAP., POWER CLAMP & FEED, CONVEYOR * AMADA HA250W HORIZ. BANDSAW, S/N 25350148, 1996, 12” X 7” CAP., POWER CLAMP & FEED, CHIP AUGER, CONVEYOR * BAILEIGH BS-250M HORIZ. BANDSAW, S/N 12066628, MITRE CAP. 

 

PRESSURE TEST SYSTEM: LORIMER HYDROSTATIC TEST SYSTEM, APPROX. 10,000 PSI, HONEYWELL CHART RECORDER, ACCESS.

 

AIR COMPRESSORS: CHICAGO PNEUMATIC QRS-30HP-UL ROTARY SCREW COMPRESSOR, S/N CAI645603, 2013, 30 HP, SOUND ENCLOSURE, 14,665 HOURS * SULLAIR 10-40 ACAC ROTARY SCREW COMPRESSOR, S/N 003-83801, 125 PSIG, 30,280 HOURS, 40 HP, 30” DIA. X 60” HORIZ. TANK * BEKO DRYPOINT RAX150NA-P REFRIG. AIR DRYER, S/N 150009619/15, 203 PSI, 150 SCFM *

 

WELD EQUIPMENT: MILLER SYNCROWAVE 350LX TIG WELDER, S/N LC249037, CHILLER * MILLER DELTAWELD 302 MIG WELDER, S/N LB173506, 22A WIRE FEEDER * WELD CURTAINS * WELDING TABLES

 

SHOT BLAST: BADBOY BLASTERS, INC. BB-200XLD TANDEM SLEEVE TYPE BLAST CABINET, COMMON RECLAIM * BADBOY SBC990 SLEEVE TYPE BLAST CABINET W/RECLAIM * 

 

MISCELLANEOUS EQUIPMENT:  DEREX DRILL GRINDER * RAMCO 50 TON HYD. H-FRAME PRESS * SCHMIDT STINGER PORTABLE MARKING MACHINE * (2) SCHMIDT STYLINER BENCH MODEL MARKING MACHINES * 20 TON HYD. H-FRAME PRESS * 16” VERT. DISC SANDER * MILWAUKEE 14” BENCH MODEL DRILL PRESS * 14” FLOOR MODEL DRILL PRESS * WILTON 15” BENCH MODEL DRILL PRESS * 

 

SUPPORT: RIDGID PIPE VISE * BANDING CARTS * BENCH GRINDERS * CHOP SAWS * BENCH VISES * HAND TOOLS * LIFTING STRAPS * RIGHT ANGLE AIR GRINDERS * HOSE REEL * C-CLAMPS * LIFTING MAGNETS * (18+) TOOL BOXES * SHOP FANS * MAINTENANCE SUPPLIES * DRUM CONTAINMENT PALLETS * WIRE BASKETS * (30+) SHOP CARTS * EXTENSION & STEP LADDERS * ANTI-FATIGUE MATS * THREAD PROTECTORS * LIFTING STRAPS * AIR HOSE * POLY DUMP CARTS

 

WAREHOUSE: (60+) PALLET RACK SECTIONS W/WIRE DECKING * APPROX. (250) 8’ CROSS BEAMS * MISC. WIRE DECKING & UPRIGHTS * (6) WAREHOUSE LADDERS * SHOP CARTS * STEP LADDERS * (3) PALLET JACKS * HAND TRUCKS * METAL SHELVING * POLY PALLETS * (11) SINGLE SIDE CANTILEVER WELDED & ADJ. BAR STORAGE RACKS 

​

Terms

 15% buyer’s premium (ONSITE AUCTION) - 18% buyers premium (ONLINE OR PROXY BIDS). FULL PAYMENT MUST BE MADE DAY OF AUCTION. We accept cash, cashier’s check, check with bank letter of guarantee, or wire transfer.  NO credit cards will be accepted!  Sales tax will be charged without tax exemption in hand on sale day! 

​

 

REMOVAL – Disassembly and loading will be at the risk and expense of buyer.   Must be removed by July ??

​

Registration

TO REGISTER FOR THIS AUCTION, ESTABLISH CREDIT & BID ONLINE

​

To be a qualified ONLINE BIDDER you must be registered on Bidspotter.com, prior to bidding.

Qualified bidders are required to have a deposit and/or approval by Duckwall & Co. Inc.

​

BIDS SUBJECT TO 18% BUYERS PREMIUM